Job Information
Adecco US, Inc. Mechanical Service Technician ($32-$36/hr+) in Peachtree, Georgia
Mechanical Service Technician ( Injection Molding)
Night shift 6:45pm-7:15am Core Functions:
Analyze and resolve root causes for ongoing quality issues as they relate to assembly, mold or molding processes including all other supporting technical processes
Communicate technical status updates to Supervisor Production/Head of Production Unit & Head of Maintenance
Provide production planning process based on the customer needs, machine assignment, press and mold availabilities
Build the technical strength of the team through hands on training
All of the below are part of the responsibilities of this position as needed:
MECHANICAL AND ELECTROMECHANICAL EQUIPMENT
Repair/replace brakes & clutches, gears, belts, sheaves/pulley, chains and sprockets, cams, seals and o-rings, bearings and bushings. Replace couplings and valves (cut-off, pressure relief, etc).
Troubleshoot/repair/replace, gears, cams, seals, o-rings, bearings, bushings, shafts and motors.
Troubleshoot/maintain chains and sprockets. Perform basic alignment.
Maintain couplings and fans.
Install/maintain valves (cut-off, pressure relief, etc).
PNEUMATIC/HYDRAULIC EQUIPMENT
Troubleshoot/repair/replace cylinders and pneumatic/hydraulic motors.
Maintain hydraulic systems, pumps and valves.
Repair/replace pneumatic/hydraulic lines, hoses, and solenoids.
Repair/replace flow controls (pneumatic or hydraulic).
Troubleshoot/maintain air compressors.
CONVEYING SYSTEMS
- Troubleshoot/repair/replace/maintain vibratory, linear motion, and material conveying systems. Repair/replace belt conveyor systems.
PUMPS SYSTEMS AND MECHANICAL EQUIPMENT
Troubleshoot/maintain centrifugal, vacuum, gear, diaphragm, positive displacement and metering pumps.
Perform alignment.
Maintain heat exchanger and pipe insulation systems.
MECHANICAL OPERATIONS
Perform welding and fabrication tasks, sheet metal fabrication, pipefitting duties and rigging tasks.
Perform basic math operations.
Operate common hand and power tools, use measuring devices and precision devices.
ELECTRICAL, POWER DISTRIBUTION AND ELECTROMECHANICAL SYSTEMS
Apply knowledge of AC theory and run wire and conduit.
Install/repair basic AC and DC controls, building electrical systems.
Operate electrical test equipment.
Fabricate/retrofit electrical control panels.
Repair ground fault detection systems.
Repair/replace low voltage transformers
Repair/replace AC motors, starters and relays.
Maintain ground fault detection system.
MACHINE AND PROCESS CONTROLS
Modify ladder logic and edit PLC software.
Troubleshoot/replace/install circuit boards.
Install/maintain/troubleshoot photo eyes and basic VFD drives (Variable Frequency Drive).
Install/maintain/troubleshoot limit and proximity switches & bar code readers.
Calibrate/install/repair basic flow and density, temperature, pressure transmitters, gages and switches
Calibrate proportional control valves and process control loop (PID).
Install/calibrate load cells.
Troubleshoot/replace transducers.
Align and replace photo eyes.
Install load cells.
Repair/replace VFD drives (Variable Frequency Drive), limit and proximity switches.
Repair flow, pressure, and speed transmitters, gages and switches.
AUTOMATION
Troubleshoot/repair/replace/maintain robots.
Design/FAB/troubleshoot end of arm tooling
Program pick/place points.
GENERAL
Setting the example for professionalism in all activities.
Maintain housekeeping of work area.
Consult and work with direct manager on all technical issues.
Notify direct manager of any non-standard or sub-performance operational issues as well as quality and safety issues.
Ensure safety adherence.
Ensure that established policies, procedures, rules and regulations are understood and followed.
Participate in all training programs as well as the GMS
Qualifications Education Requirements:
High School Diploma
Requires a minimum of 2 years maintenance/technical experience within an plastic injection molding facility.
Requires a minimum of 1 year mechanical/electrical experience.
Requires a minimum of 2 years general preventative maintenance experience in medical injection molding industry.
Experience Requirements:
Experienced knowledge of Good Manufacturing Practice within the Medical or Food Industry.
Experience working in a fast paced operational environment with constant interaction with operators, technicians and equipment.
Experience in problem solving and troubleshooting of processes and process equipment
Prior diagnostic/troubleshooting and preventative experience preferred.
Ability to read blue prints, manufacturer's specifications and schematics
Additional Information
Must have good interpersonal skills with the ability to interface constructively and cooperatively with a wide variety of departmental staff and intra-department personnel.
Attention to detail and accuracy.
Ability to work well within a team environment and capable of completing projects with minimal supervision.
Excellent verbal communication skills.
Required to speak, read and write English language
Good organizational and planning skills
Required to supply hand tools
Pay Details: $32.00 to $36.00 per hour
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adeccousa.com/candidate-privacy
The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.
Adecco US, Inc.
- Adecco US, Inc. Jobs